Add to Favorites
Share

Drop-in Anchor Bolts

  • Description
Product Detail

    A Drop-In anchor consists of a tubular expansion shield and a solid, cone-shaped expander plug. The expander plug is case hardened and tempered to prevent galling and binding during expansion. The shield has four equally spaced slots for a portion of its length, the bottom part may be knurled. The shield also has a smooth, flangeless top that allows either flush or countersunk installation. the bottom lip of the shield is tapered to allow maximum depth and holding power.

     

    DROP-IN ANCHORS

     

    Anchor Size/

    Hole Diameter

    T

    Minimum

    Ultimate Tensile (lbs.)

    Ultimate Shear (lbs.)






    Bolt Size

    Thread Length

    Embedment

    4000 psi. Concrete

















    1/4

    3/8

    1/2

    1


    2067

    1321


    3/8

    1/2

    5/8

    1

    9/16

    3995

    3714


    1/2

    5/8

    3/4-1 3/16

    2


    4110

    5854


    5/8

    7/8

    1-1 3/16

    2

    1/2

    5750

    8754


    3/4

    1

    1 3/16-1 1/4

    3

    3/16

    10807

    11627









    A two-piece, internally   threaded expansion anchor with four equally-spaced longitudinal slots   extending from the



    bottom end of the outer






    Description

    shield, inside of which   sits a pre-assembled dilating plug. The bottom lip of the anchor is tapered.   It is permissible



    for a section   of the








    shield to be knurled, to increase the gripping action of the anchor.












        


    Intended for flush mounted, medium to heavy-duty applications in solid materials such as stone and concrete. It


    Applications/

    can be used in, but are



    not limited to, overhead assemblies such as duct work and pipe hangers because the internal plug holds its


    Advantages


    position. Can also be used







    to anchor handrails and floor-mounted door stops.








    Steel

    18-8 Stainless






    Material

    Anchor body: AISI 12L14   cold rolled steel



    Expander Plug: AISI 12L14/1215 cold rolled steel,

    Anchor body: 303   Stainless steel





    case-hardened

    Expander Plug: 303   Stainless steel



    and tempered







    Anchor Spacing

    Anchors should be   installed a minimum of ten anchor diameters between each other and a minimum   of five anchor


    diameters from the edge.







    Depth of Hole

    Should be at least equal   to the length of the anchor.







    Tensile and

    The suggested safe working load is one-fourth the average proof test loads shown in the above table.


    Shear


    Strengths









Send your message to this supplier
To:  

ZHENYA FASTENER

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:  

  
You May Like
Not exactly what you want? One request, multiple quotations Get Quotations Now >>
Related Searches :